Baby Name Reveal Sign, Hello World Balloon with Stars

The name you have been waiting to share. Introduce your little one with a baby name reveal sign that puts their names at the centre of the photograph. This wooden balloon combines the words Hello World, My Name Is with a large engraved first name, space for additional names and a scattering of little stars.

A Pink or Blue satin ribbon finishes the balloon neck, while dark engraved lettering stands out against the natural birch grain. Choose a compact keepsake or a larger photo prop, add the names exactly as you want them written, and make that first introduction feel personal.

A star balloon for their full-name reveal

The design is all about the lettering: a flowing first name, a contrasting uppercase line beneath it and a smaller script line at the bottom when supplied. It is a lovely way to share a first name, middle name and surname together, or to include two middle names in the arrangement. The surrounding stars give the plaque its own gentle character without taking attention away from the name.

The names are laser engraved into the wood. The satin ribbon adds a little colour while the face of the balloon keeps its natural pale wood finish. You can see the detail of the lettering, star outlines and thin wooden edge in the gallery close-up.

Product details

• Wording: Hello World, My Name Is, followed by your chosen names.
• Design: a balloon silhouette with engraved stars and dots.
• Material: 3 mm natural birch plywood.
• Ribbon: choose Pink or Blue satin ribbon.
• Small: approximately 11 × 13 cm.
• Large: approximately 15 × 20 cm.
• Included: one personalised wooden balloon plaque with your selected ribbon.

Dimensions refer to the wooden balloon, excluding the trailing ribbon. All measurements are approximate. Accessories and supports used to style the photographs are not included.

Choose your size and ribbon

Small — 11 × 13 cm: a compact choice for close-up name-reveal photographs, a simple flat lay with booties or keeping alongside baby's first cards.

Large — 15 × 20 cm: gives the names more space in the composition and makes the balloon more prominent in wider photographs. Compare both sizes in the gallery before choosing the one that suits your plans.

Both sizes use the same 3 mm birch plywood and are available with either Pink or Blue ribbon. The ribbon choice changes the satin ribbon; the wooden face and engraved lettering keep the same natural finish.

Personalisation — exactly what to enter

1. Choose the ribbon colour and size using the product options.
2. Enter the names in the personalisation box. Put the first name first and clearly label any additional names so we know where you want them.
3. Check spelling, hyphens and accents before adding the plaque to your basket. We use the names you provide.

Example matching the Pink photograph:
First name: Lilah
Middle name: Elizabeth
Surname: May

This gives the large script name Lilah, the uppercase line ELIZABETH and the smaller script line May. For the Blue example, enter First name: Adam; Middle name: Cassius; Surname: Wright.

Only want one or two names? Enter just those names and tell us which lines to use. For example: First name: Noah; lower line: James; no third line. A surname is optional, and the additional lines may be used for middle names instead. Do not enter “none” as a name; write “no third line” when you want that line omitted.

The standard top wording is Hello World, My Name Is. You do not need to retype it. If you want a different heading, a particularly long name or a layout beyond the examples, contact us before ordering so we can confirm the design. A preview can be requested before production.

Ideas for your name-reveal photograph

For a simple introduction, photograph the balloon on pale linen with the ribbon curving below it, alongside baby's first outfit or a pair of tiny booties. Soft window light brings out the engraved lettering and natural grain. Leave a little space around the edges so the full balloon remains visible when you crop the picture for sharing.

It also works beautifully held in adult hands beside a parent cradling the baby, with the plaque and ribbon safely away from the child. You can use it for the first photograph you send to grandparents, a name reveal shared with friends or a photograph to keep in a baby album.

Afterwards, store the plaque with the first outfit, hospital cards and other little memories. If you are buying it as a new baby gift, check the baby's exact names and preferred ribbon colour with the parents before ordering.

Natural birch and engraved detail

Wood grain, tone and small natural markings vary, so every plaque has its own character. The laser-cut edge may be darker than the face, and engraving can appear slightly different across the grain or under different lighting. Handle the thin wooden balloon gently, particularly around the neck.

Keep it dry and wipe gently with a soft, dry cloth. This is a decorative keepsake and photo prop for adult-supervised use. Keep the plaque and long ribbon out of children's reach, away from a baby's face and body, and remove them before sleep. A stand is not included.

Frequently asked questions

What is engraved on the balloon?

The standard heading is Hello World, My Name Is, followed by the names you provide. Engraved stars and dots surround the lettering, with your chosen satin ribbon tied beneath.

Can I include a first name, middle name and surname?

Yes. Clearly label each name in the personalisation box. The gallery shows Lilah / Elizabeth / May and Adam / Cassius / Wright as examples of the three-line arrangement.

Do I have to include a surname?

No. The lower lines can hold middle names instead. You can also order with just one or two names; tell us which lines to use and which to leave out.

How do I request an empty line?

Write a clear instruction such as “no third line”. Do not type “none” as a name. Supplying the names with labels makes your intended layout easier to follow.

Can you engrave hyphenated names or accents?

Enter the spelling, punctuation and accents exactly as required. For an unusually long name or a layout you are unsure about, contact us before ordering so we can check the fit.

Can I change the Hello World heading?

Please contact us before purchasing to discuss different wording. The standard option uses the heading shown in the photographs.

Can I request a preview?

Yes. Request a preview before production if you would like to check the arrangement of the names.

Are the names raised above the wood?

The lettering on this design is engraved into the birch plywood. For a painted raised-name design, see our baby announcement plaque.

What sizes are available?

Small is approximately 11 × 13 cm and Large is approximately 15 × 20 cm. These measurements cover the wooden balloon and exclude the trailing ribbon.

What is the plaque made from?

It is laser cut and engraved from 3 mm birch plywood with a natural wooden finish.

Can I choose the ribbon colour?

Yes. Select Pink or Blue in the product options. Both ribbon colours are available with both sizes.

Is this a physical product?

Yes. You receive one personalised wooden balloon plaque with ribbon. It is not a printable or a digital download.

Is a stand or any photo styling included?

No. Stands, supports, blankets, toys and other accessories in the photographs are styling props. Your order includes the wooden plaque and selected ribbon.

Is it suitable for a new baby gift?

Yes, especially when you know the baby's exact names. It makes a personal keepsake for parents who enjoy taking newborn photographs and collecting memories.

When will it be dispatched?

We usually dispatch on the next working day once all personalisation details are confirmed. Free standard UK delivery is available; check the delivery information at checkout for current estimates and any faster options.

Will the wood match the photographs exactly?

The selected design will follow the examples, but natural grain and colour vary. Small wood markings and a darker laser-cut edge are part of the material's appearance.

How do I care for it?

Keep it dry, dust with a soft cloth and store gently with your keepsakes. Avoid soaking, harsh cleaners or bending the balloon neck.

Can a baby play with the plaque or ribbon?

No. It is a decorative keepsake for adult-supervised photographs. Keep it out of children's reach and remove it before sleep.

Browse more in this collection: Personalised Baby Gifts.